We finally see PP on the rise in January, up .15 / lb. Amazing how everyone is calling now for recycled pellet in this market.
“It is what it is”
We had yet another experience today of the deal too good to be true. We were offered the same great materials as by many others called “PET Non Wovens” 250 tons. why would you not not jump on this, even though the buy is amazing?
Because it is not PET Non-woven. It is what it is and not what some people read it is and thinks it is based on distant info that they did not actually check out. Getting fed up with people mis representing items and making things what they re not to make a quick buck and be gone. This market has been overwhelmed by shady people that screw anyone they can and it is old. Where are they now?
Ensure you get what you want and consistently; do not accept less.
Confirm everything, which means photos, both up close and volume; details; and samples
Get an MSDS sheet or physically confirm.
We see polypropylene going up .02 – .04 / pound in November and should be flat in Dec. There is a large amount of PP/HO repro on the market right now but pricing is still high for repro but should remain flat through 2012. That being said, it is what it is and the scrap market is caught up finally so we should see some leveling out for the processors and buyers.
For a long time I never gave thought to the amount of laundry detergent used at home. That would be the one home chemical which the old philosophy of “more is better” always applied to my laundry habits. This surprisingly contradicted the managerial habits I developed watching costs as part of a hospitality management team. Unsupervised, I would discover that a 800 square foot restaurant dinning room being moped with 2 cups of heavy duty 2X concentrate soap mixed with 2 gallons of water. Along with the overwhelming aroma of lemon dis-infective would be the overwhelming long term costs applied to the dry goods inventory. The manufacturer’s recommended amounts, if followed, are more than enough.
Now, applying this same observation to my personel habits have opened my awareness of actually how much perfectly good home products I would essentially just pour down the drain and eventually into the water treatment facilities, streams, water table, etc… . Perhaps this simple and quit obvious use of laundry detergent is just catching up to me, but actually using the measuring cap for recommended load size at home has already saved money while providing the same fresh and so clean results.
There is a term I like to use, “land fill avoidance”, in describing aspects of what I do. Applied towards a broader definition the term has made me aware not just the stuff I put into the trash bin but also how much daily chemicals I use in my life.
Across the country this summer states are suffering from abnormal conditions due to lack of snow pack and minimal spring rains. One side-effect of this is fire risk, and it’s never been more visible than the current fires sweeping the west. One cause of fires in dry conditions like this is live ammunition rounds at shooting ranges. In 2012 alone there have been 20 fires in Utah from shooting ranges. All it takes is a single spark to ignite.
The challenge is to develop a solution to help mitigate this risk with recycled materials
The solution: 100% steel free recycled rubber chips that are reinforced with polyester and nylon. We gather excess rubber from manufacturers and chop it into 3” pieces to be used on shooting ranges as bullet stopping material. Utilizing an engineering principle known as in-elastic collision, this rubber not only stops projectiles without sparking it also traps their by-products from entering the air and ground. Also, the rubber itself is fire resistant. We have held a plumbers torch to it for minutes and it does not maintain a flame. Another factor in considering our rubber chip solution is costs. By not entering the dirt, companies can avoid expensive HAZMAT handling fees as well as recovering dollars by recycling the lead itself.
Overall, this is an excellent, “green” and cost-effective solution for shooting ranges to minimize the risk of fire in dry conditions and another great solution by the commodigy team.
It is time for the next chapter of commodigy and to continue the vision to the global green trading platform for green commodities and products. We are in the process of implementing changes over the next six months which will enable us to grow with our customers needs as well as expanding into a new direction for our trading platform. What you can expect over the next six months:
1. A new look
2. Even Easier
3. A full trading platform
4. Comprehensive reporting
5. Auction capabilities
6. Multiple analyst reviews
We appreciate all of the feedback that we receive and the ideas, keep letting us know your thoughts on the transformation as well as bear with us while we undertake this transformation to the new Commodigy.
Here we go again, all of those players that surface in the market when it is tough and trying to rely on the relationship. Where exactly were they a few months ago when the market was the other way and benefiting not using recycle plastics. I think we will keep this post simple and easy; look at the big picture and consider action in a tactical environment when considering a strategic relationship; Patience is a virtue and will show who the real partner are versus the opportunists.
These are the times when we see how partners really are and if in fact a partner or not. Will those customers still be there in these tough market conditions? Are they really partners or opportunists? We have had the advantage of being the “middle man” for many customers and suppliers and it really needs to be a partnership, especially in plastics and recycling.
There are those customers that are there when they are saving .20 – .40 / lb. on in a hot market, but as soon as the market turns, gone. They simply stop buying and come up with great excuses. Is this a partnership? I have always believed in partnerships being two way streets and not a matter of convenience. What if the supplier / small recycler were to stop selling to you in a hot market or hike their prices?
From the supplier’s side, I have seen several large recyclers get burnt in the past few years, which has been a result of several key points that could be addressed. First, the suppliers need to keep a better read on the market and not procrastinate communicating to the scrap suppliers. Secondly, buy pricing of scrap needs to be adjusted immediately per the market, even when the other “Scrappy” characters are there offer higher amounts to take your feed stream. Take care your business and communicate, if they are true partners they will stick with you or come back to you in a few months when they get burnt.
From the customer side (i.e. Manufacturer) trying to squeeze every penny out of your suppliers only goes so far before you lose that supplier. If you truly are partners you will work with your suppliers in all markets, not just when it is convenient for you and in your favor. Understand the market over time and look at the situation strategically, not just tactically. It is easy to penny pinch and try to save every penny in a down market, but look at the supply chain over a longer period of time and understand your supplier’s business and what they are dealing with if you want to keep them
Communicate, partners need to talk, understand, and work together in all markets; If you lose the supply stream altogether, who wins? Ensure you have a good program in place that is good for everyone in every market.
It is a good time to buy and secure feed streams of reprocessed PP resins. We have several new feed streams available of PP Repro 35 – 40 melt pellet available for sale. Please reach us if you do not see the material on the site that you need.
Here we go again. Commodity grade PP dropped .14 / lb. and planning on going down another .08 – .10 in November. We have seen this many times over the past five to seven years and what have we learned:
- Recycling materials lag prime and it usually takes 2- 3 months to catch up. Mitigate your risk with monthly price reviews and look at his as a true partnership through all markets, steady wins the race.
- We find out who the real business people are in this market and who the shady ones are that give scrap a bad reputation. If you are having processing done outside, keep an eye on your materials and ensure your feed streams are consistent and the same. We have seen many times where processors cut corners and substitute cheaper materials into the formulas, cut corners, steal, and increase “shrinkage” in the processing. Keep aware of your materials and volumes.
- It is a great time to secure feed streams. The market is flooding with good materials, which is good for green applications to secure an ongoing steady stream.
- Using densified material is a good idea to supplement the higher cost pellet, there is great material out there and if feeds well for injection molders. In general, keep your options open on recycled plastics and forms.
- Retailers will always be knocking when the market dips or free falls even though the materials were planned months ago. Ensure you have a good supply chain and communication plan in place.
- The formula is everything; if you do not have the right formula that is constant and works, it won’t matter what material you have and not everyone can recycle plastic well.
- We are seeing quite a bit of manufactures explore other plastics that are more stable than the PP market.
The best practice is to put a stable program in place that monitors all of this for you and keep you stable in all markets and ensures you constantly have an ongoing feed stream for your applications. Be aware of market conditions and ensure you have a good communication plan in place with suppliers and customers.
Great job Odorno on the odorless diaper bags, what a great product and we are happy to promote this product. Stay with us as we expand our green portfolio on ...
We often get asked how is the pellet from the recycled materials made, so what better way to show you. Although there are several ways to take it to a pellet ...
We continue to recycle post industrial materials and scrap, but we have a very big focus on what we are doing with post consumer materials. There has been so ...
These are the times when we see how partners really are and if in fact a partner or not. Will those customers still be there in these tough market conditions...
The good news is that there is much less scrap plastic out there, which means several things: First, companies are more environmentally conscience and more effi...